Jianzhi International Trade (Tianjin) Co., Ltd.

Home / Products / Galvanized Pipe Fittings / Galvanized Pipe Fittings Hexagon Cap Fig.300

  • Galvanized Pipe Fittings Hexagon Cap Fig.300

  • Galvanized Pipe Fittings Hexagon Cap Fig.300

  • Galvanized Pipe Fittings Hexagon Cap Fig.300

Galvanized Pipe Fittings Hexagon Cap Fig.300

Galvanized Pipe Fittings Hexagon Cap Fig.300

Size: 3/8''-2''(DN10-DN50)

Standard: EN10242 / ANSI / ASME B16.3 / DIN2950 / IS0 49 / NBR6943 / IS1879 / BS EN10242

Threaded Standard: EN10226 / ASME B.1.20.1 / DIN2999 / ISO7-1 / ISO228 / IS554 / BS EN10226

Work Pressures: PN25 / 2.5Mpa / 363PSI /CLASS 150 / 25Bar

UL Listed /FM Approved /CE /ABNT /TSE /SNI /ISI

Product Dimensions

Galvanized Pipe Fittings Hexagon Cap Fig.300

Technical Data

Maximum Pressure: 25 BAR (363PSI) (2.5MPA) CLASS 150

Maximum Temperature: 200°C (392°F)

Tensile Strength: 350MPA

Hardness: HB150 (Brinell)

Elongation Rate: 10%

Suitable Applications: Water, Oil, Gas, Petro-Chemical

Material: Malleable Iron


Tips: Fitting size and normal sizes(DN)



Fitting sizeNormal size (DN)
1/86
1/48
3/810
1/215
3/420
125
1 1/432
1 1/240
250
2 1/265
380
4100
5125
6150


Threaded fitting with female thread for the permanent or temporary closing of the hole tightly when installing steel pipes in water and gas supply systems using a seal.

The use of cast iron threaded fittings is not only the maximum reliability of the connection points but also an increased service life of the entire pipeline system in the compartment, protecting against accidental leaks, breaks, and depressurization.